Effects of temporal scales and space mismatches on the TRMM 3B42 v7 precipitation product in a remote mountainous area          下载免费PDF全文

Shiva Ebrahimi  Cheng Chen  Qiuwen Chen  Yinsheng Zhang  Ning Ma  Qammerul Zaman 《水文研究》2017,31(24):4315-4327

The accurate measurement of precipitation is essential to understanding regional hydrological processes and hydrological cycling. Quantification of precipitation over remote regions such as the Tibetan Plateau is highly unreliable because of the scarcity of rain gauges. The objective of this study is to evaluate the performance of the satellite precipitation product of tropical rainfall measuring mission (TRMM) 3B42 v7 at daily, weekly, monthly, and seasonal scales. Comparison between TRMM grid precipitation and point‐based rain gauge precipitation was conducted using nearest neighbour and bilinear weighted interpolation methods. The results showed that the TRMM product could not capture daily precipitation well due to some rainfall events being missed at short time scales but provided reasonably good precipitation data at weekly, monthly, and seasonal scales. TRMM tended to underestimate the precipitation of small rainfall events (less than 1 mm/day), while it overestimated the precipitation of large rainfall events (greater than 20 mm/day). Consequently, TRMM showed better performance in the summer monsoon season than in the winter season. Through comparison, it was also found that the bilinear weighted interpolation method performs better than the nearest neighbour method in TRMM precipitation extraction.  相似文献   

Up-scaling application of microbial carbonate precipitation: optimization of urease production using response surface methodology and injection modification     

M. M. Kakelar  S. Ebrahimi 《International Journal of Environmental Science and Technology》2016,13(11):2619-2628

In order to reduce the cost of the microbial-induced carbonate precipitation, mixotrophic growth of Sporosarcina pasteurii was carried out at different yeast extract/sodium acetate concentrations and constant chemical oxygen demand for optimal production of urease enzyme. Optimization of cultivation conditions was also investigated using a 3-level central composite design approach based on the response surface methodology. A good agreement between predicted values of enzyme activity and experimental results was observed (R ² value of 0.973). All three chosen independent variables had statistically great effects on the efficiency of urease activity. The maximum activity of 2.98 mM urea min^?1 was achieved at yeast extract concentration of 5 g L^?1, NH₄ concentration of 9.69 g L^?1, and incubation time of 60 h as the optimal conditions. Thereafter, a novel injection procedure as sequencing batch mode injection has been proposed for bacteria and cementation fluid injection at obtained optimal urease activity. After fourth injection of bacteria and cementation fluid, uniform CaCO₃ distribution with unconfined compression strength of 795 kPa was obtained even for poorly graded sand. The presented experimental approach for optimizing urease activity and strength production in porous media can be used to design the treatment protocol for practical engineering applications.  相似文献   

Investigation of heavy metal uptake by three types of ornamental plants as affected by application of organic and chemical fertilizers in contaminated soils     

Haftarani Dodangeh  Ghasem Rahimi  Mahboobeh Fallah  Eisa Ebrahimi 《Environmental Earth Sciences》2018,77(12):473

Accumulation of heavy metals in soil media is considered as a serious environmental problem, which is hazardous to human and animal health. There have been several methods for the removal of these toxic metals. One of the commonly used methods is the use of plants, especially ornamental plants to remove heavy metals from soils. In this regard, the study has been conducted on the soils contaminated with Mn, Pb, Ni, and Cd using factorial experiment in a completely randomized design with two factors including three types of soil (soil A for the highest level of contamination, B for the lowest level of pollution, and C for the non-contaminated soil) with different contamination levels as well as three types of ornamental plants, gladiolus, daffodils, and narcissus with four replications. In another part of the study, soil A and gladiolus were used in a completely randomized design with three replications, and also three types of fertilizers, such as municipal solid waste compost, triple superphosphate and diammonium phosphate, were added to this soil. In addition, the availability of heavy metal was studied in gladiolus as influenced by the application of organic and chemical fertilizers. The results showed that heavy metal pollution caused reduction in the dry weight of gladiolus and tulips compared to the control sample, while there was no significant effect of pollution on the dry weight of narcissus. The uptake of Mn, Pb, Ni, and Cd by all three plants has been increased with enhancing the pollution levels of heavy metals. The highest concentration of Pb in the shoots of plants was observed in soil A with an average amount of 61.16 (mg kg^?1), which revealed a substantial difference relative to the treatment of soil B and C. The most and least amount of Ni in the plants shoots were related to soil A and soil C with an average of 2.35 and 0.89 mg kg^?1, respectively. The uptake of Pb by shoots of all three plants was nearly similar to each other, while more Pb was absorbed by the bulbs of gladiolus compared to the bulbs of other plants. Increment in the pollution levels led to the decrement in enrichment factor (EF); however, there was no effect of pollution levels on EF of Mn and Pb. Moreover, there was no effect of increasing pollution levels on translocation factor of these elements. In gladiolus, after application of organic and chemical fertilizers, it was observed that the concentration of heavy metals was far more in the bulbs compared to the shoots. In conclusion, the cultivation of these ornamental plants is highly recommended due to not only their decorative aspect but also their ability for bioremediation as well as being economical.  相似文献   

Numerical ANFIS-Based Formulation for Prediction of the Ultimate Axial Load Bearing Capacity of Piles Through CPT Data     

Behnam Ghorbani  Ehsan Sadrossadat  Jafar Bolouri Bazaz  Parisa Rahimzadeh Oskooei 《Geotechnical and Geological Engineering》2018,36(4):2057-2076

This study explores the potential of adaptive neuro-fuzzy inference systems (ANFIS) for prediction of the ultimate axial load bearing capacity of piles (P_u) using cone penetration test (CPT) data. In this regard, a reliable previously published database composed of 108 datasets was selected to develop ANFIS models. The collected database contains information regarding pile geometry, material, installation, full-scale static pile load test and CPT results for each sample. Reviewing the literature, several common and uncommon variables have been considered for direct or indirect estimation of P_u based on static pile load test, cone penetration test data or other in situ or laboratory testing methods. In present study, the pile shaft and tip area, the average cone tip resistance along the embedded length of the pile, the average cone tip resistance over influence zone and the average sleeve friction along the embedded length of the pile which are obtained from CPT data are considered as independent input variables where the output variable is P_u for the ANFIS model development. Besides, a notable criticism about ANFIS as a prediction tool is that it does not provide practical prediction equations. To tackle this issue, the obtained optimal ANFIS model is represented as a tractable equation which can be used via spread sheet software or hand calculations to provide precise predictions of P_u with the calculated correlation coefficient of 0.96 between predicted and experimental values for all of the data in this study. Considering several criteria, it is represented that the proposed model is able to estimate the output with a high degree of accuracy as compared to those results obtained by some direct CPT-based methods in the literature. Furthermore, in order to assess the capability of the proposed model from geotechnical engineering viewpoints, sensitivity and parametric analyses are done.  相似文献   

Vibration suppression of structures     

N. D. Ebrahimi 《地震工程与结构动力学》1989,18(1):1-10

A procedure for vibration suppression of elastic structures and systems is introduced in this paper. First, the equations of the response of the system to external forces, based on a discretized linear model, are developed. Next, the vibration suppression is formulated as a minimization problem with control (external) forces as unknowns. Then, the optimality condition is applied to this problem and a set of linear simultaneous equations is obtained for the unknown forces. The scheme is applied to a number of simple examples for illustration. The results show that the procedure is very effective and, at the same time, very flexible compared to methods that are based on continuous models (partial differential equations). The actual (hardware) implementation can be achieved by means of either passive absorbers or active forces (actuators).  相似文献   

Evaluation of the “fishing down marine food web” process in the north-west of Persian Gulf(Khuzestan Province) during the period of 2002–2011     

MASHJOOR Sakineh  KAMRANI Ehsan 《海洋学报(英文版)》2015,34(10):103-110

The worldwide increase in commercial fisheries and its impact on ecosystems as well as inefficient fishery management have led to overfishing and frequent breakdown of traditional fish stocks.In this context,an analysis of Khuzestan inshore fisheries data covering the years 2002–2011,was conducted in reliance on testing for occurrence of the fishing down marine food webs(FDMFW) phenomenon in the North of Persian Gulf Large Marine Ecosystem(LME).In this study,the mean trophic level(m TL) and the fishing-in-balance(FIB)-index of Khuzestan landings during this period of time were estimated using the trophic level of 47 fishery resources.Increase in total landings(Y) was observed,which explained the high fishing yield in major fishery resources(especially demersal).Moreover,the moderates decreasing trend in m TL per decade,and the increasing trend in FIB-index were observed.The status of fishery resources in Khuzestan inshore waters(under exploited but not overexploited),the rise in Y,FIB and slightly drop in m TL can be considered as indirect indicators of the fishing impacts on the trophic structure of marine communities.Based on this result,probability occurrence of FDMFW process in Khuzestan inshore waters is low to some extent.However,we suggest that the goal of management programs in Khuzestan inshore waters should prevent the continuance of this trend in the long-term using an ecosystem-based approach.  相似文献   

Wormhole deformation of the Reissner-Nordstr?m spacetime     

M. R. Mehdizadeh  E. Ebrahimi  N. Riazi 《Astrophysics and Space Science》2011,336(2):479-484

A radial deformation of the Reissner-Nordstr?m metric which leads to the appearance of charged, traversable wormholes is investigated. It is shown that the resulting wormholes are not covered by event horizons and physical signals can travel between the two parallel universes either way across the wormhole. The status of energy conditions and the classification of geodesics are also discussed in details.  相似文献   

Evaluation of Air Pollution Trend Using GIS and RS Applications in South West of Iran     

Mostafa Moradi Dashtpagerdi  Seyed Javad Sadatinejad  Rafat Zare Bidaki  Ehsan Khorsandi 《Journal of the Indian Society of Remote Sensing》2014,42(1):179-186

In this paper, remote sensing and GIS have been used to assess the status of NO₂ at the south west of Iran. 221 data about concentration of NO₂ was extracted from Ozone Monitoring Instrument. Ordinary kriging and inverse distance weighting interpolation methods was used to interpolate data. Results showed that ordinary kriging method using cross-validation have had less error. North east of the study area has the highest concentration of NO₂ (329 molecule/cm²) and the concentration of NO₂ decreases from north east to South west of the study area. On the other hand, data trend results showed that the data seems to exhibit a fairly strong trend in the east west direction and a weaker one in the north–south direction.  相似文献   

印度河扇水道堤岸外侧更新世沉积物波发育特征与形成过程分析^*          下载免费PDF全文

浩克  纪友亮  张胜久  刘炎鑫  Khurram Shahzad  Saad Ahmed Mashwani  刘笑语  姜燕 《古地理学报》2022,24(2):389-404

印度河扇更新世发育的沉积物波结构复杂、形态多样,其形成过程的认识程度低。本次研究通过高分辨率地震数据和地震解释技术,研究了印度河扇沉积物波的波长、形态、波峰变化等形态特征;阐述了沉积物波与沉积物变形特征的差异、识别了两者的区分标志;总结了水道堤岸斜坡和区域斜坡上沉积物波的分布规律;在此基础上,讨论了沉积物波的形成机理和控制因素,分析了沉积物波的形成过程,并建立了印度河扇沉积物波的形成模式。研究表明: (1)研究区沉积物波波长平均为486.84 m,最大1473 m;波高在10~60 m之间,平均30 m。(2)沉积物波的形态有对称型和非对称型,其迁移方式有上坡迁移型、加积型和下坡迁移型;沉积物波主要发育在水道堤岸的斜坡上,在区域斜坡上也发育少量的沉积物波,这2种沉积物波波脊的走向差异很大,水道堤岸斜坡上的沉积物波主要分布于水道凹岸堤岸的外侧,距离水道越远其规模(波长、波高)越小,波脊走向近于NE-SW方向,与水道的走向平行或斜交;区域斜坡上的沉积物波波脊的走向多为NW-SE向,平行于区域斜坡的走向,离源区越远规模越大。(3)水道堤岸斜坡上的沉积物波是由水道型浊流在离心力的作用下,溢出水道的凹岸,在堤岸外侧的斜坡上沉积形成的,堤岸斜坡的角度对沉积物波的发育规模影响不大,浊流的强度和输沙量对其规模影响大;区域斜坡上发育的沉积物波是由顺坡而下的非水道化的浊流沉积形成;滑塌变形造成的起伏地貌以及早期沉积物波的存在,也都影响了后期沉积物波的发育。  相似文献   

Unconfined Compression Strength of Polymer Stabilized Forest Soil Clay     

Mousavi  Fatemeh  Abdi  Ehsan 《Geotechnical and Geological Engineering》2022,40(8):4095-4107

Geotechnical and Geological Engineering - Due to undesired mechanical characteristics, some forest soils cause problems in road construction. Several methods have been proposed for stabilizing...  相似文献